Installation Guides


Guide for
Unicolored Stickers


Guide for
Colored Stickers

Recommended Products

Baby Stickers for Cars

Colored Baby Stickers

Kid Stickers for Twins

Colored Kid Stickers

Siblings Stickers with custom Motifs

Colored Siblings Stickers with custom Motifs

Family Stickers

Family Sticker Set

Stickers for Brothers and Sisters

Colored Stickers for Siblings

Label Sticker

Sticker in XXL Size

Sticker with Dog Motifs

Licence Plate Sticker

Placename Sign Sticker

Road Sign Stickers

Guide for Unicolored Stickers

Stickers made from unicolored vehicle labeling film are manufactured for immediate installation.

  1. Only perform the installation at temperatures above 10 °C (50 °F).
  2. Clean the area that the sticker will be applied to from grease and dirt.
    ATTENTION: A lotus effect coating of windows and painted surfaces strongly reduces the adhesive power of the sticker. If the car has a lotus effect coating, the area must be cleaned with isopropyl alcohol (IPA) or silicone remover first.
    HINT: The sticker should not be placed in the wiping area of the windscreen wiper.
  3. The sticker will be delivered on a background paper and is covered by a transparent transfer film. Pull off the background paper carefully. Make sure that the motif remains entirely on the transfer film.
    HINT: If the sticker does not properly come off the background paper (e. g. after lying for a long time), place it on plain surface and strongly press with a flat, blunt item (e. g. old credit card) then try to peel it off the background paper again.
  4. Align the sticker and adhere it with the transfer film to desired place.
  5. Apply pressure to the transfer plastic film with a flat, blunt item (e. g. old credit card) or with your flat hand.
  6. Peel off the transparent transfer film carefully.
  7. Done. The sticker is washing bay proof after about three to five days. The durability in exterior areas is about three to five years.

The stickers can be removed without residue at warm temperatures. For a better removal, you may heat up the sticker with a hair blower.

Guide for Colored Stickers

  1. Only perform the installation at temperatures above 10 °C (50 °F).
  2. Clean the area that the sticker will be applied to from grease and dirt.
    ATTENTION: A lotus effect coating of windows and painted surfaces strongly reduces the adhesive power of the sticker. If the car has a lotus effect coating, the area must be cleaned with isopropyl alcohol (IPA) or silicone remover first.
    HINT: The sticker should not be placed in the wiping area of the windscreen wiper.
  3. Remove the sticker from the background paper.
  4. Align the sticker and adhere it to the desired place.
  5. Done. The sticker is washing bay proof after about three to five days. The durability in exterior areas is about three to five years.

The stickers can be removed without residue at warm temperatures. For a better removal, you may heat up the sticker with a hair blower.